L - R: Allister Salie - Lindumn Tool Works; Primrose Mjobo - Armilla; Pajero Anderson - Cape Gate; Gillie Adams - Cape Gate; Joseph Ramokhele - Armilla
CAPE TRAINEES - APRIL TO JUNE 2008
CAPE TRAINEES - MAY TO JULY 2009
L - R: Shaune Makrayi - Armilla; Chris Coetzer - The Badge Company; Lizette Eksteen - Plate Rite CC; Vivwe Tulula - Control Instruments Automotive; Felecia Carelse - Armilla; Peter Julies - Designamite; Ben Geldenhuys - Glitterama Electroplating (behind); Cobie Arends - Plate Rite (in front); Iwan Breytenbach - The Badge Company; Anele Bantwini - Control Instruments Automotive; Matthew Bronslow - Metalquip.
CAPE TRAINEES - JUNE TO AUGUST 2011
L - R: Ali Boduloeng - Lindumn Toolworks; Benneth Klaasens - Satchwell Controls; Graham Abrahams - Plate Rite CC; Dion Viljoen - Stellenbosch University; Johan Myburgh - Domline; Monique Petersen - Armilla; Ilsa Meyer - Armilla; Stuart Aitken - Pinclip Industries; Charlton Abrahams - TRW Occupant Restraints
SOME COMMENTS FROM THIS CLASS
This course is a must for all in the plating industry, from ground level right up to management. I learnt a great deal on all aspects of plating, from what chemicals to use, rectifiers, job preparation, to proper water management and minimizing effluent. The course is well presented and is understandable to all levels, even if science is not your strong point.
This course is an excellent introduction to electroplating, especially for a person like myself that has been introduced to this industry recently. Lessons learned have already been applied in my factory with excellent results achieved. Thanks for empowering me through knowledge!
This course helps me to make my work lots easier. I don't have to be scared anymore if I have a problem 'cause I just take out my SAMFA book and then take care of it.
You could definitely use the material to advance yourself in your workplace to be the plater you always wanted to be.
ELECTROPLATING THEORY AND PRACTICE TRAINING COURSE
CAPE TRAINEES - JULY TO SEPT 2010
L - R: Sihaam Boolay - Precision Press; Karen Visser- Carrol Boyes; Anthony Towsen - Carrol Boyes; Malibongwe (Alfred) Maseti - Carrol Boyes; Paul Wijtenburg - Pinclip Industries; Waleed Dennis - Glitterama; Ilsa Meyer - Armilla; William de Morny- Precision Press; Jeremy Burger - Glitterama
Dion Viljoen - University of Stellenbosch
Johann Myburgh - Domline
Ilze Meyer - Armilla
Benneth Klaasens - Satchwell Controls
SOME COMMENTS FROM THIS CLASS
I appreciated the practical examples and experiences shared by the facilitator. A more condensed version of the manual could be beneficial for future reference.
Karen Visser - Carrol Boyes
As a first time plater this course is a must; it truly helped me in my everyday job and and and I will surely attend the more advanced course in the future
Anthony Towsen - Carrol Boyes
To me this is the opportunity for a new era - to reach what I have been looking for in the future.
Malibongwe (Alfred) Maseti - Carrol Boyes
Tony van der Spuy is an excellent teacher.
Jeremy Burger - Glitterama
I had complete benefit out of this class. You learn a lot of things you did not know. Tony is an excellent teacher. Thanks
Waleed Dennis - Glitterama
It is certainly beneficial attending this course. You tend to take simple things for granted and this course certainly revisited those aspects. Thanks!!
William de Morny - Precision Press
Great course for learning the principles of plating. Would love to do a course on how to practically run a plating plant - i.e. how to deal with the day to day issues.
